It's time for a bike change - Cornish is on the hunt again..
- Cornish
- Posts: 396
- Joined: 14 Mar 2014, 17:37
- Your Bike: BMW RnineT
- Location: Walton-On-Thames & Cornwall
- Has thanked: 176 times
- Been thanked: 46 times
Re: It's time for a bike change - Cornish is on the hunt aga
Man loving the QS so smooth and even goes 1st to 2nd. (which usually from previous QS experience you're meant to clutch to 2nd). Have to do a "fast ride out" to fully experience it yet simple set up through the app and it's rocking. Thanks again for the advice gents.
Only thing next may will be sprockets, yet haven't been that bothered by it yet...I know you all said so before the barrage comes my way
Carpe de Pasty...
Only thing next may will be sprockets, yet haven't been that bothered by it yet...I know you all said so before the barrage comes my way
Carpe de Pasty...
Carpe De Pasty
Veni - Vidi - Vici (I came, I saw, I Conquered)
Veni - Vidi - Vici (I came, I saw, I Conquered)
- Cornish
- Posts: 396
- Joined: 14 Mar 2014, 17:37
- Your Bike: BMW RnineT
- Location: Walton-On-Thames & Cornwall
- Has thanked: 176 times
- Been thanked: 46 times
Re: It's time for a bike change - Cornish is on the hunt aga
Oh advice please....I've noticed that the right hand side tank fairing is sitting close to the frame and has marked it; anyone else had this problem?
Plus, having taken the seat fully off to do the QS I noticed that too has rubbed the right hand side sub frame quite badly; any advice?
Also, as I ride the footpegs on the balls of my feet I've noticed a rubbing on the left hand side swing arm - what protection (non-carbon) would you recommend?
Finally yes I may look at putting some decals on yet not the winter testing ones as I don't wish to cover it fully - any subtle kits you'd recommend?
Thanks guys. Cornish
Carpe de Pasty...
Plus, having taken the seat fully off to do the QS I noticed that too has rubbed the right hand side sub frame quite badly; any advice?
Also, as I ride the footpegs on the balls of my feet I've noticed a rubbing on the left hand side swing arm - what protection (non-carbon) would you recommend?
Finally yes I may look at putting some decals on yet not the winter testing ones as I don't wish to cover it fully - any subtle kits you'd recommend?
Thanks guys. Cornish
Carpe de Pasty...
Carpe De Pasty
Veni - Vidi - Vici (I came, I saw, I Conquered)
Veni - Vidi - Vici (I came, I saw, I Conquered)
- Cav
- Posts: 8030
- Joined: 27 Oct 2015, 12:00
- Your Bike: 2009 ZX6R
- Has thanked: 1064 times
- Been thanked: 2249 times
Re: It's time for a bike change - Cornish is on the hunt aga
A company called Igus make adhesive sheet with a sole purpose of being a wearing surface. You could buy that and cut it to size for your swingarm? They do gloss black
I personally like the carbon swingarm protectors that came with the bike
I personally like the carbon swingarm protectors that came with the bike
- Kwacky
- Posts: 38976
- Joined: 21 Oct 2013, 21:52
- Your Bike: Brutale 800RR, 1000SX Ninja
- Location: Brum
- Has thanked: 4362 times
- Been thanked: 8416 times
Re: It's time for a bike change - Cornish is on the hunt aga
I've got carbon ones on the zx6r which work IMO.
Before that I used clear adhesive tape similar to the stuff Cav recommends.
Before that I used clear adhesive tape similar to the stuff Cav recommends.
- Perkles
- Posts: 5889
- Joined: 11 Mar 2014, 21:51
- Your Bike:
- Location: birminghamshire
- Has thanked: 2152 times
- Been thanked: 1465 times
Re: It's time for a bike change - Cornish is on the hunt aga
my boot rubs through the paint on the lhsd swingarm ,I used singmakers vinyl to protect it but it just rubbed through again .Its needs something a bit more solid imo
- Perkles
- Posts: 5889
- Joined: 11 Mar 2014, 21:51
- Your Bike:
- Location: birminghamshire
- Has thanked: 2152 times
- Been thanked: 1465 times
Re: It's time for a bike change - Cornish is on the hunt aga
my boot rubs through the paint on the lhsd swingarm ,I used singmakers vinyl to protect it but it just rubbed through again .Its needs something a bit more solid imo
- rocket
- Posts: 2453
- Joined: 21 May 2014, 20:12
- Your Bike: zx10rrrrrrr
- Has thanked: 639 times
- Been thanked: 751 times
Re: It's time for a bike change - Cornish is on the hunt aga
i have a few rub marks the paint on the frame / swingarm is poor. glad you like the qs can not go wrong for the money
"80mph" sorry officer I possibly could not have done that I'm no Valentino Rossi.
- Cornish
- Posts: 396
- Joined: 14 Mar 2014, 17:37
- Your Bike: BMW RnineT
- Location: Walton-On-Thames & Cornwall
- Has thanked: 176 times
- Been thanked: 46 times
Re: It's time for a bike change - Cornish is on the hunt aga
I've got some protective vinyl in da garage so will try that first. Thanks gents.
Anyone had the fairing rubbing the frame I mentioned?
Carpe de Pasty...
Anyone had the fairing rubbing the frame I mentioned?
Carpe de Pasty...
Carpe De Pasty
Veni - Vidi - Vici (I came, I saw, I Conquered)
Veni - Vidi - Vici (I came, I saw, I Conquered)
- Cav
- Posts: 8030
- Joined: 27 Oct 2015, 12:00
- Your Bike: 2009 ZX6R
- Has thanked: 1064 times
- Been thanked: 2249 times
Re: It's time for a bike change - Cornish is on the hunt aga
I've got it but just ignore it because you only see it when removing the fairings. I'd class it as weight saving anyway
- Cornish
- Posts: 396
- Joined: 14 Mar 2014, 17:37
- Your Bike: BMW RnineT
- Location: Walton-On-Thames & Cornwall
- Has thanked: 176 times
- Been thanked: 46 times
Re: It's time for a bike change - Cornish is on the hunt aga
Hi guys. Monty and I were talking about the 'clunky' noise we get from the front end on our kwackers.
I've checked for head race bearing movement and all is good on that front (remember the issue I had on a 929 a few years back).
I'll do the 'push the front wheel up against the garage wall' approach Monty suggested at the weekend.
Yet is it from the broken tank fairing bracket? The replacement should arrive this week. And I don't think so as it sounds from the front.
I've checked the discs and they seem within tolerance of moving.
I've checked the pads for wear and they've got loads left.
So is it the pads shifting in the callipers?
It clunks with the lever pulled in or not over bumps. I've applied the brake at standstill and it clunks on forward or back movement too.
I'm due to service the brakes late Sunday so maybe that'll sort it.
Just it's loud and wanted your views gents.
Ta. Cornish.
Carpe de Pasty...
I've checked for head race bearing movement and all is good on that front (remember the issue I had on a 929 a few years back).
I'll do the 'push the front wheel up against the garage wall' approach Monty suggested at the weekend.
Yet is it from the broken tank fairing bracket? The replacement should arrive this week. And I don't think so as it sounds from the front.
I've checked the discs and they seem within tolerance of moving.
I've checked the pads for wear and they've got loads left.
So is it the pads shifting in the callipers?
It clunks with the lever pulled in or not over bumps. I've applied the brake at standstill and it clunks on forward or back movement too.
I'm due to service the brakes late Sunday so maybe that'll sort it.
Just it's loud and wanted your views gents.
Ta. Cornish.
Carpe de Pasty...
Carpe De Pasty
Veni - Vidi - Vici (I came, I saw, I Conquered)
Veni - Vidi - Vici (I came, I saw, I Conquered)
- Perkles
- Posts: 5889
- Joined: 11 Mar 2014, 21:51
- Your Bike:
- Location: birminghamshire
- Has thanked: 2152 times
- Been thanked: 1465 times
- Cornish
- Posts: 396
- Joined: 14 Mar 2014, 17:37
- Your Bike: BMW RnineT
- Location: Walton-On-Thames & Cornwall
- Has thanked: 176 times
- Been thanked: 46 times
Re: It's time for a bike change - Cornish is on the hunt aga
Oh, any thoughts as to why that is Perkles?Perkles wrote:mine doesnt clunk
Carpe De Pasty
Veni - Vidi - Vici (I came, I saw, I Conquered)
Veni - Vidi - Vici (I came, I saw, I Conquered)
- Kwacky
- Posts: 38976
- Joined: 21 Oct 2013, 21:52
- Your Bike: Brutale 800RR, 1000SX Ninja
- Location: Brum
- Has thanked: 4362 times
- Been thanked: 8416 times
- Cornish
- Posts: 396
- Joined: 14 Mar 2014, 17:37
- Your Bike: BMW RnineT
- Location: Walton-On-Thames & Cornwall
- Has thanked: 176 times
- Been thanked: 46 times
Re: It's time for a bike change - Cornish is on the hunt aga
Good point I'll double check buddy yet they feel firmKwacky wrote:Are all the usual bolts torqued up?
Carpe De Pasty
Veni - Vidi - Vici (I came, I saw, I Conquered)
Veni - Vidi - Vici (I came, I saw, I Conquered)
- Monty
- Posts: 6737
- Joined: 12 Mar 2014, 07:59
- Your Bike: KTM 690 SMC R
- Location: Peak District
- Has thanked: 2139 times
- Been thanked: 2458 times
Re: It's time for a bike change - Cornish is on the hunt aga
I've taken mine to two garages Macclesfield Motorbikes and DK in Stoke and neither can find anything wrong with it.
DK had it up on a stand checked the head stock bearings and then took it out for a spin. All fine, the only thing he said was "Those tyres are sh@gged, not sure how you're riding around on them. They're bloody horrible!"
May just be a case of they all do that Sir. Certainly a few on here.
http://www.zxforums.com/forums/zx-6r-fo ... clunk.html" onclick="window.open(this.href);return false;
DK had it up on a stand checked the head stock bearings and then took it out for a spin. All fine, the only thing he said was "Those tyres are sh@gged, not sure how you're riding around on them. They're bloody horrible!"
May just be a case of they all do that Sir. Certainly a few on here.
http://www.zxforums.com/forums/zx-6r-fo ... clunk.html" onclick="window.open(this.href);return false;
Monty™© MCMLXXII
- Kwacky
- Posts: 38976
- Joined: 21 Oct 2013, 21:52
- Your Bike: Brutale 800RR, 1000SX Ninja
- Location: Brum
- Has thanked: 4362 times
- Been thanked: 8416 times
Re: It's time for a bike change - Cornish is on the hunt aga
I think Kwaks are generally noisy bikes. That clunk when you drop it into first takes some getting used to.
- Cornish
- Posts: 396
- Joined: 14 Mar 2014, 17:37
- Your Bike: BMW RnineT
- Location: Walton-On-Thames & Cornwall
- Has thanked: 176 times
- Been thanked: 46 times
Re: It's time for a bike change - Cornish is on the hunt aga
Update...good news and bad.
Good - quickshifter is amazing!! Found out what the clunking noise is...
Bad - rode out with JT today...we both agree it's not the pads, discs etc so went to MD Racing as this clunking noise is doing my head in. Mike, who's done work on a fee if my bikes shows it's the fork bushes and yes a little movement in the head race bearings too. £450 to sort!!!! Then on way home notice high pitch noise from rear like a 'squeal' sound.
Phoned the lovely and very helpful Nicky at Jordan bikes who have been very good yet now I'm pissed. Due to proposed costs at MD Racing I may have to go to P&H for a second opinion as Jordan bikes not heard of fork bushes going, seals yes and it'd cost £150 to sort which they'd cover of course.
I've got to get the bike up there as not riding anymore as pissed. Did I mention I'm pissed? So whatever happens I'll get them to check and lube calliper bolts, bearings and check out front and rear brakes! Man why always me.
Carpe de Pasty...
Good - quickshifter is amazing!! Found out what the clunking noise is...
Bad - rode out with JT today...we both agree it's not the pads, discs etc so went to MD Racing as this clunking noise is doing my head in. Mike, who's done work on a fee if my bikes shows it's the fork bushes and yes a little movement in the head race bearings too. £450 to sort!!!! Then on way home notice high pitch noise from rear like a 'squeal' sound.
Phoned the lovely and very helpful Nicky at Jordan bikes who have been very good yet now I'm pissed. Due to proposed costs at MD Racing I may have to go to P&H for a second opinion as Jordan bikes not heard of fork bushes going, seals yes and it'd cost £150 to sort which they'd cover of course.
I've got to get the bike up there as not riding anymore as pissed. Did I mention I'm pissed? So whatever happens I'll get them to check and lube calliper bolts, bearings and check out front and rear brakes! Man why always me.
Carpe de Pasty...
Carpe De Pasty
Veni - Vidi - Vici (I came, I saw, I Conquered)
Veni - Vidi - Vici (I came, I saw, I Conquered)
- Deegee
- Posts: 4206
- Joined: 02 Apr 2014, 11:20
- Your Bike: Daytona 675 & Tiger 900
- Location: Côte d'Essex
- Has thanked: 1046 times
- Been thanked: 967 times
Re: It's time for a bike change - Cornish is on the hunt aga
Sorry to hear of your woes Cornish, however on the "why is it always me" comment, just remember very very few people sell a bike, car etc in perfect condition, most people find there's something that needs attention on said bike car etc, and also find it will cost a few quid to sort and then sell it on. Understandably not what you want to hear, but there it is.
Btw, I am feeling sympathetically pissed for you. Fingers crossed you get it sorted pdq and for free.
P.S. Isn't this the sort of thing they should have picked up on a full pre-delivery inspection?
Btw, I am feeling sympathetically pissed for you. Fingers crossed you get it sorted pdq and for free.
P.S. Isn't this the sort of thing they should have picked up on a full pre-delivery inspection?
- Perkles
- Posts: 5889
- Joined: 11 Mar 2014, 21:51
- Your Bike:
- Location: birminghamshire
- Has thanked: 2152 times
- Been thanked: 1465 times
Re: It's time for a bike change - Cornish is on the hunt aga
Bummah Cornish ,I did say my didn't do it so there's definitely something not right with yours but 450 to sort it
- Cornish
- Posts: 396
- Joined: 14 Mar 2014, 17:37
- Your Bike: BMW RnineT
- Location: Walton-On-Thames & Cornwall
- Has thanked: 176 times
- Been thanked: 46 times
Re: It's time for a bike change - Cornish is on the hunt aga
Yeah I hear you and eyes wide open and all that I'm fine with paying out as Monty will tell you. Just I got conned before with a busted headstock on a frame. Clearly this (hopefully) is nothing like that, just moaning I suppose. Better to get it off my chest.Deegee wrote:Sorry to hear of your woes Cornish, however on the "why is it always me" comment, just remember very very few people sell a bike, car etc in perfect condition, most people find there's something that needs attention on said bike car etc, and also find it will cost a few quid to sort and then sell it on. Understandably not what you want to hear, but there it is.
Btw, I am feeling sympathetically pissed for you. Fingers crossed you get it sorted pdq and for free.
P.S. Isn't this the sort of thing they should have picked up on a full pre-delivery inspection?
Yeah I checked the last service bill and it said the seals needed replacing and test riding to be done. I'll raise this with them tomorrow yet like I say they've been nothing but accommodating with the various parts needed so far.
I just want to ride it and enjoy not be stuck without it or working on it in the garage.
Carpe De Pasty
Veni - Vidi - Vici (I came, I saw, I Conquered)
Veni - Vidi - Vici (I came, I saw, I Conquered)