Page 2 of 2

Re: Suspension - reading between the bu!!sh!t

Posted: 06 Jan 2016, 22:48
by Kwacky
Good question. The honest answer is that I know the rear needs a refresh, so I may as well have the spring and revalve done. It's not expensive so I'm prepared to have it done to see if I benefit from it.

The stock suspension is stiff at the rear. I can get bounced around on the road which makes me back off. The guy at Parkitt adjusted it which improved things but he reckons they're not designed for the road as well as the zx6r models either side of it.

If you read racing forums people have struggled with the current zx6r because kwak toned the suspension down. Money has to be spent getting the new model sorted. By all accounts the model Cav and I have got is the best track weapon ZX6R in terms of handling.

Re: Suspension - reading between the bu!!sh!t

Posted: 06 Jan 2016, 22:59
by Blade
Interested to hear how you get on and hope it's a good improvement and your happy.

When do you plan to get it done out of interest ?

Re: Suspension - reading between the bu!!sh!t

Posted: 06 Jan 2016, 23:10
by Kwacky
Dunno mate. Family life is all I'm concentrating on at present. I was going to drop the Kwak off at Perkles over Christmas but other events took over.

All being well it should be done March or April.

Re: Suspension - reading between the bu!!sh!t

Posted: 07 Jan 2016, 03:52
by kiwikrasher
Blade wrote:So how do you know they work if you don't understand what's going on ?

What you think is the best is only the best you know (happy) doesn't mean there isn't better
Blade I am the same as you, I like to know how and why. I don't know if this has been a by product of my type of work or why I ended up in this type of work or a bit of both.

But having been a trainer in a number of different roles as well, I have learnt that not everyone is the same. It took me a long time to accept not everyone wants to know the how and why. To be honest it can still frustrate me, as in my experience it's the easiest way to learn a system, but there are a number of ways different people learn. You can still be quite knowledgeable on a system by just learning cause and effect. Suspension has this symptom, adjust "A" and it gets better. You don't HAVE to know what goes on inside, but SOME of us like too.

Re: Suspension - reading between the bu!!sh!t

Posted: 07 Jan 2016, 06:42
by Blade
Image

Re: Suspension - reading between the bu!!sh!t

Posted: 07 Jan 2016, 06:57
by kiwikrasher
Of course not. You need duct tape, WD-40 and glue in your tool box too!

Image

Re: Suspension - reading between the bu!!sh!t

Posted: 07 Jan 2016, 07:15
by Blade
Tbh kiwi I actually meant what you said I just worded it badly. I didn't mean have a detailed knowledge of how it all works more as you put it "Suspension has this symptom, adjust "A" and it gets better." ;)

Re: Suspension - reading between the bu!!sh!t

Posted: 07 Jan 2016, 07:53
by Blade
Image

Re: Suspension - reading between the bu!!sh!t

Posted: 07 Jan 2016, 11:40
by C00kiemonster
Blade wrote:Image
Oh god I want that toolbox now I've seen that :(

Re: Suspension - reading between the bu!!sh!t

Posted: 07 Jan 2016, 12:21
by rocket
kiwikrasher wrote:Of course not. You need duct tape, WD-40 and glue in your tool box too!

How could you miss Zip ties !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! they hold the world together

Re: Suspension - reading between the bu!!sh!t

Posted: 07 Jan 2016, 21:29
by kiwikrasher
rocket wrote:
kiwikrasher wrote:Of course not. You need duct tape, WD-40 and glue in your tool box too!

How could you miss Zip ties !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! they hold the world together
Take my man card off me, such a fail (facepalm)

(lol) (lol) (lol)

Re: Suspension - reading between the bu!!sh!t

Posted: 08 Jan 2016, 09:10
by Cav
Please understand this - I don't believe I am a guru and I certainly don't believe that I am any more knowledgeable than anyone in here. I like to learn about as many things as I can in as much detail as I can. I also like to share my new found knowledge but understand that the vast majority of people who read it have no interest or have a differing opinion. It's a part of life I'm well accustomed to! :P

Kwacky is right, our model of ZX6R is the most track-ready Kawasaki ever made. However, it's still a compromise between track and road and therefore, to get the most out of it, you should revalve it.

The main point about my original post is that it doesn't matter if you have the wrong spring, you can valve it to get the same stroke effect and near-identical feel.

I weigh 82kg without gear which means I need 1 grade firmer spring than standard, however, as my spring is in good condition I will not change the spring for the 'correct' one, instead I will get the valving done to get the suspension working as it should for my weight (firmer compression and lighter rebound). If I was lighter than the stock spring is designed for then I would have the opposite done.

I will be playing with the adjusters before and at my first trackday this year. I'll set my sag then start with the front. It'll take a day really but it's not the end of the world :)

Re: Suspension - reading between the bu!!sh!t

Posted: 08 Jan 2016, 09:29
by Perkles
one thing you will notice straight away once your shock is revalved is better and more even tyre wear,it will also be easier to adjust closer to how you want it

Re: Suspension - reading between the bu!!sh!t

Posted: 08 Jan 2016, 09:51
by Cav
Exactly what I'm hoping for !!

Im' also hoping that a click does something! haha.. rebound is shot, literally no adjustment after a session on track. I'm assuming it overheats either through lack of nitrogen in the reservoir or old sludgy oil

Re: Suspension - reading between the bu!!sh!t

Posted: 09 Jan 2016, 09:05
by Rossgo
kiwikrasher wrote:Of course not. You need duct tape, WD-40 and glue in your tool box too!

Image
This is literally what our engineers in our department do!!