Aprilia Rs250
- rocket
- Posts: 2453
- Joined: 21 May 2014, 20:12
- Your Bike: zx10rrrrrrr
- Has thanked: 639 times
- Been thanked: 751 times
Re: Aprilia Rs250
I have cobbled together the seat unit / number plate and today got an mot then i had a quick blast around woodhead / snake pass. I'm really pleased it feels really fast and involving to ride. It flicks from left to right with ease and was so much fun. The more aggressive i was going into the corners the better the bike handled. It had a little bit of reluctance to drop to the floor in the last 3rd. I'm going to drop the forks through the yokes another 10mm and see if that improves it. However i think the forks could do with a respring. I'm a very happy man. 8-)
"80mph" sorry officer I possibly could not have done that I'm no Valentino Rossi.
- Kwacky
- Posts: 38721
- Joined: 21 Oct 2013, 21:52
- Your Bike: Brutale 800RR, 1000SX Ninja
- Location: Brum
- Has thanked: 4338 times
- Been thanked: 8389 times
- rocket
- Posts: 2453
- Joined: 21 May 2014, 20:12
- Your Bike: zx10rrrrrrr
- Has thanked: 639 times
- Been thanked: 751 times
Re: Aprilia Rs250
Under neath the fairings it's good but there's more to come hopefully. I already want to make changes. I just want to ride it and enjoy it
"80mph" sorry officer I possibly could not have done that I'm no Valentino Rossi.
- D6Nutz
- Posts: 7473
- Joined: 21 Oct 2013, 21:26
- Your Bike: Speed Triple 1200 RS
- Has thanked: 828 times
- Been thanked: 2625 times
- Contact:
Re: Aprilia Rs250
Looks the nuts mate, bet it sounds good too.
You never really learn to swear until you learn to drive.
If everything seems under control, you're not going fast enough - Mario Andretti
If everything seems under control, you're not going fast enough - Mario Andretti
- Deegee
- Posts: 4206
- Joined: 02 Apr 2014, 11:20
- Your Bike: Daytona 675 & Tiger 900
- Location: Côte d'Essex
- Has thanked: 1046 times
- Been thanked: 967 times
Re: Aprilia Rs250
I'm very Jealous Rocket, chuffed to bits you've gotten a ride out on it after the winters toil, fwiw I'm especially chuffed with that kick start (maybe not the cable tie though), looks very pukka indeed.
- kiwikrasher
- Posts: 8916
- Joined: 17 Mar 2014, 04:32
- Your Bike: ‘16 Thruxton R. '10 Multistrada 1200 S.
- Location: Kurrajong Heights, NSW, Australia
- Has thanked: 4626 times
- Been thanked: 4711 times
Re: Aprilia Rs250
Hats off to you Rocket! Awesome result and I've really enjoyed this thread. I had a RZ250R in my youth and a handful of 2 stroke trail bikes so have a soft spot for them. The RS wasn't very common over in NZ, think I maybe saw 2 in total personally and that was at race meets. I'd love to do something similar if I had the time.
Happiness is not a destination. It is a way of life.
- Perkles
- Posts: 5889
- Joined: 11 Mar 2014, 21:51
- Your Bike:
- Location: birminghamshire
- Has thanked: 2152 times
- Been thanked: 1465 times
- rocket
- Posts: 2453
- Joined: 21 May 2014, 20:12
- Your Bike: zx10rrrrrrr
- Has thanked: 639 times
- Been thanked: 751 times
Re: Aprilia Rs250
Thanks perkles. There's still more to be done on it. You will see it and if your fit enough you can have a go !!!
"80mph" sorry officer I possibly could not have done that I'm no Valentino Rossi.
- Perkles
- Posts: 5889
- Joined: 11 Mar 2014, 21:51
- Your Bike:
- Location: birminghamshire
- Has thanked: 2152 times
- Been thanked: 1465 times
Re: Aprilia Rs250
You do know I will hold you to that !rocket wrote:Thanks perkles. There's still more to be done on it. You will see it and if your fit enough you can have a go !!!
- rocket
- Posts: 2453
- Joined: 21 May 2014, 20:12
- Your Bike: zx10rrrrrrr
- Has thanked: 639 times
- Been thanked: 751 times
Re: Aprilia Rs250
Was going to try and do a track day on sunday as its a classic / 2 stroke day. But im having over heating problems tried bleeding the system a few times. Tried a few different things like new thermostat but its still over heating. I think a head gasket has gone.
"80mph" sorry officer I possibly could not have done that I'm no Valentino Rossi.
- rocket
- Posts: 2453
- Joined: 21 May 2014, 20:12
- Your Bike: zx10rrrrrrr
- Has thanked: 639 times
- Been thanked: 751 times
Re: Aprilia Rs250
Checked the coolant pipes. All were fine and flushed the system. Then checked the thermostat which was new. It was jammed open the pin was cockled not allowing it to shut. Then I took the heads off the pistons and barrels look fine no damage the gaskets look ok no obvious signs of failure.
So ordering some new head gaskets and get it all bolted back together
So ordering some new head gaskets and get it all bolted back together
"80mph" sorry officer I possibly could not have done that I'm no Valentino Rossi.
- rocket
- Posts: 2453
- Joined: 21 May 2014, 20:12
- Your Bike: zx10rrrrrrr
- Has thanked: 639 times
- Been thanked: 751 times
Re: Aprilia Rs250
I have had a little time away from the rs. I put it at the back of the garage for a few weeks while i sorted other stuff out.
However i picked up a tank that i had ordered months ago last weekend. I got the bike out of the garage and tried the tank for size.
Then over the last few days i have changed the head gaskets and resealed the clutch cover that had decided to leak. It has had a couple of heat cycles and im going to re torque the heads back down after a couple more.
While im prepping the tank i think im going to change the clocks. When riding the bike I found them hard to keep in sight all the time.
However i picked up a tank that i had ordered months ago last weekend. I got the bike out of the garage and tried the tank for size.
Then over the last few days i have changed the head gaskets and resealed the clutch cover that had decided to leak. It has had a couple of heat cycles and im going to re torque the heads back down after a couple more.
While im prepping the tank i think im going to change the clocks. When riding the bike I found them hard to keep in sight all the time.
"80mph" sorry officer I possibly could not have done that I'm no Valentino Rossi.
- Kwacky
- Posts: 38721
- Joined: 21 Oct 2013, 21:52
- Your Bike: Brutale 800RR, 1000SX Ninja
- Location: Brum
- Has thanked: 4338 times
- Been thanked: 8389 times
- Blade
- Posts: 18772
- Joined: 14 Mar 2014, 18:43
- Your Bike: Kawasaki ZX10R
- Location: North West
- Has thanked: 3134 times
- Been thanked: 3767 times
- Kwacky
- Posts: 38721
- Joined: 21 Oct 2013, 21:52
- Your Bike: Brutale 800RR, 1000SX Ninja
- Location: Brum
- Has thanked: 4338 times
- Been thanked: 8389 times
- kingfixer
- Posts: 2045
- Joined: 13 Mar 2014, 18:08
- Your Bike: 2019 Aprilia Dorsoduro 900
- Has thanked: 381 times
- Been thanked: 697 times
Re: Aprilia Rs250
Love that carbon tank
https://gmrprojects.co.uk/" onclick="window.open(this.href);return false;
- rocket
- Posts: 2453
- Joined: 21 May 2014, 20:12
- Your Bike: zx10rrrrrrr
- Has thanked: 639 times
- Been thanked: 751 times
Re: Aprilia Rs250
I have laquered the tank. Had major problems with my new paint gun it did not want to set up properly and i should have just not bothered spraying it. However i did and it was not the best job. So i spent some time with wet and dry and the g10. Its come out ok. Will probably re do it at some stage.
So i got it all back together today and took it for a quick run. I had a bit of clutch slip which was just adjustment that i sorted when I stopped. Apart from that it held its temp no signs of over heating so fingers crossed its all fixed.
Next is trying to sort out the handling
So i got it all back together today and took it for a quick run. I had a bit of clutch slip which was just adjustment that i sorted when I stopped. Apart from that it held its temp no signs of over heating so fingers crossed its all fixed.
Next is trying to sort out the handling
"80mph" sorry officer I possibly could not have done that I'm no Valentino Rossi.
- rocket
- Posts: 2453
- Joined: 21 May 2014, 20:12
- Your Bike: zx10rrrrrrr
- Has thanked: 639 times
- Been thanked: 751 times
Re: Aprilia Rs250
After the ride the other day i noticed one of the forks was weeping. So ive changed the fork seals and done the bushes . tried to set the sag and with the preload wound all the way off the springs are still to heavy so think i will have to get some different springs for the forks.
"80mph" sorry officer I possibly could not have done that I'm no Valentino Rossi.