What are you doing today ??

For all the none biking stuff. Say hello, chew the fat or flame the forum.
User avatar
kiwikrasher
Posts: 8862
Joined: 17 Mar 2014, 04:32
Your Bike: ‘16 Thruxton R. '10 Multistrada 1200 S.
Location: Kurrajong Heights, NSW, Australia
Has thanked: 4577 times
Been thanked: 4647 times

Re: What are you doing today ??

Post by kiwikrasher »

The reason we have to quarantine on the way back is part of our agreement with Timor operating in their waters (was a split originally but the maritime borderline has been changed recently, long story) is to provide jobs for Timorese nationals. It’s why we used to fly via Timor pre COViD. So we have Timorese nationals on the platform. Therefore we are classed as if we have actually been in Timor.

The Timorese personnel were doing the same quarantine pre work as well, so that was wrapped up in the dropping of ours.

Initially we were getting exemptions on return to Aussie and I was just home isolating, but the govt had a change in heart due to our exposure to Timorese nationals and the fact they have no oversight of their quarantine process. It’s fair enough from the govt. point of view.

Although I liked the idea of more time at home, not a lot of people were happy with the increased risk with dropping pre-work quarantine, but it is costing the company a packet in leasing the facility and paying us overtime (1.2 weeks per trip) so they have been doing their best to get rid of it.
Happiness is not a destination. It is a way of life.
User avatar
Kwacky
Posts: 38538
Joined: 21 Oct 2013, 21:52
Your Bike: Brutale 800RR, 1000SX Ninja
Location: Brum
Has thanked: 4314 times
Been thanked: 8352 times

Re: What are you doing today ??

Post by Kwacky »

Had a physio session with the lovely Leila. There's more improvement in the shoulder, which is good.
User avatar
D6Nutz
Posts: 7420
Joined: 21 Oct 2013, 21:26
Your Bike: Speed Triple 1200 RS
Has thanked: 828 times
Been thanked: 2604 times
Contact:

Re: What are you doing today ??

Post by D6Nutz »

Gone for a walk in the woods with the kids. Such a lovely afternoon.

I needed that.

Heading home for an hour in the hot tub.

Sent from my ONEPLUS A6013 using Tapatalk
You never really learn to swear until you learn to drive.

If everything seems under control, you're not going fast enough - Mario Andretti
User avatar
Cav
Posts: 7947
Joined: 27 Oct 2015, 12:00
Your Bike: 2009 ZX6R
Has thanked: 1035 times
Been thanked: 2199 times

Re: What are you doing today ??

Post by Cav »

Another 2 coats of paint in the nursery... in a different colour.

Did anyone realise it's a tough choice to decide which white to go for?
User avatar
Kwacky
Posts: 38538
Joined: 21 Oct 2013, 21:52
Your Bike: Brutale 800RR, 1000SX Ninja
Location: Brum
Has thanked: 4314 times
Been thanked: 8352 times

Re: What are you doing today ??

Post by Kwacky »

Packing more spiders. Another 20 gone. I'm having to use the spider room as my office. So I'm reducing my collection.
User avatar
D6Nutz
Posts: 7420
Joined: 21 Oct 2013, 21:26
Your Bike: Speed Triple 1200 RS
Has thanked: 828 times
Been thanked: 2604 times
Contact:

Re: What are you doing today ??

Post by D6Nutz »

Kwacky wrote:Packing more spiders. Another 20 gone. I'm having to use the spider room as my office. So I'm reducing my collection.
At least you won't have a fly problem in the office as the weather warms up :D

Sent from my ONEPLUS A6013 using Tapatalk
You never really learn to swear until you learn to drive.

If everything seems under control, you're not going fast enough - Mario Andretti
User avatar
Cav
Posts: 7947
Joined: 27 Oct 2015, 12:00
Your Bike: 2009 ZX6R
Has thanked: 1035 times
Been thanked: 2199 times

Re: What are you doing today ??

Post by Cav »

Ran into a problem with moving the radiator... only one place does 15mm to 8mm internal reducers near me and they don't open on weekends. No running water so having to stay at the in-laws.
User avatar
Kwacky
Posts: 38538
Joined: 21 Oct 2013, 21:52
Your Bike: Brutale 800RR, 1000SX Ninja
Location: Brum
Has thanked: 4314 times
Been thanked: 8352 times

Re: What are you doing today ??

Post by Kwacky »

Did you start the job before you had the parts?
User avatar
StMarks
Posts: 4578
Joined: 17 Mar 2014, 21:55
Your Bike: Daytona 675 graphite
Location: East Riding of Yorkshire
Has thanked: 915 times
Been thanked: 1306 times

Re: What are you doing today ??

Post by StMarks »

Cav wrote:Ran into a problem with moving the radiator... only one place does 15mm to 8mm internal reducers near me and they don't open on weekends. No running water so having to stay at the in-laws.
Toolstation.?
https://www.toolstation.com/made4trade- ... cer/p96709" onclick="window.open(this.href);return false;
User avatar
C00kiemonster
Posts: 8425
Joined: 22 Oct 2013, 07:11
Your Bike: Triumph Street Triple 765 R
Location: Not Froggie Land
Has thanked: 4296 times
Been thanked: 1737 times

Re: What are you doing today ??

Post by C00kiemonster »

Cav wrote:Ran into a problem with moving the radiator... only one place does 15mm to 8mm internal reducers near me and they don't open on weekends. No running water so having to stay at the in-laws.
A mixture of 8mm and 15mm on radiators is very unusual in a house. It won't be as good that's for sure.

Buy some push fit end stops for emergencies, always useful and then you can isolate a radiator.
User avatar
Cav
Posts: 7947
Joined: 27 Oct 2015, 12:00
Your Bike: 2009 ZX6R
Has thanked: 1035 times
Been thanked: 2199 times

Re: What are you doing today ??

Post by Cav »

Kwacky wrote:Did you start the job before you had the parts?
User avatar
Cav
Posts: 7947
Joined: 27 Oct 2015, 12:00
Your Bike: 2009 ZX6R
Has thanked: 1035 times
Been thanked: 2199 times

Re: What are you doing today ??

Post by Cav »

Kwacky wrote:Did you start the job before you had the parts?
I started the job after purchasing the wrong parts... I measured the pipe with the paint on late last night. 2mm difference was enough to not get a seal.

C00kiemonster wrote:
Cav wrote:Ran into a problem with moving the radiator... only one place does 15mm to 8mm internal reducers near me and they don't open on weekends. No running water so having to stay at the in-laws.
A mixture of 8mm and 15mm on radiators is very unusual in a house. It won't be as good that's for sure.

Buy some push fit end stops for emergencies, always useful and then you can isolate a radiator.
All new radiator valves/thermostats are 15mm but our house has 8mm pipe. Finding 15mm to 10mm wasn't a problem but few places stock 15-8.

The ones we are after are a fancy type of olive to be honest. You can buy them as a 1 piece or 3 piece. They get crushed as you tighten the nut and seal onto the pipe.




I can get the part tomorrow which is a good thing.
User avatar
D41
Posts: 12923
Joined: 22 Sep 2014, 11:36
Your Bike: Triumph Daytona 650.
Has thanked: 4283 times
Been thanked: 1129 times

Re: What are you doing today ??

Post by D41 »

Today...... assembling a dozen computer monitors + stands.....a piece of wee-wee.
Tomorrow or Tuesday...."installing" them (eg. slapping them on to some desks).
User avatar
Cav
Posts: 7947
Joined: 27 Oct 2015, 12:00
Your Bike: 2009 ZX6R
Has thanked: 1035 times
Been thanked: 2199 times

Re: What are you doing today ??

Post by Cav »

I got the part! Back to work for now though and will finish it later.
User avatar
Cav
Posts: 7947
Joined: 27 Oct 2015, 12:00
Your Bike: 2009 ZX6R
Has thanked: 1035 times
Been thanked: 2199 times

Re: What are you doing today ??

Post by Cav »

Unfortunately the part didn't seal. We had to drain the system again and stay at the In-Laws for another night. The part worked on the thermostat side but not the valve side. I suspect it was due to removing too much material when scraping off the paint plus worst case tolerance of the part itself.

Ah well, I'll buy a 1 piece and 3 piece just to see.
User avatar
StMarks
Posts: 4578
Joined: 17 Mar 2014, 21:55
Your Bike: Daytona 675 graphite
Location: East Riding of Yorkshire
Has thanked: 915 times
Been thanked: 1306 times

Re: What are you doing today ??

Post by StMarks »

plumbers paste.?
User avatar
Cav
Posts: 7947
Joined: 27 Oct 2015, 12:00
Your Bike: 2009 ZX6R
Has thanked: 1035 times
Been thanked: 2199 times

Re: What are you doing today ??

Post by Cav »

It's difficult to make that stuff look neat. I've cut off the end of the pipe with the weird olive thing now anyway so we'll give this a go. If it doesn't work again, I have brand new 8mm pipe and we will solder a join on to hide in the trunking.
User avatar
StMarks
Posts: 4578
Joined: 17 Mar 2014, 21:55
Your Bike: Daytona 675 graphite
Location: East Riding of Yorkshire
Has thanked: 915 times
Been thanked: 1306 times

Re: What are you doing today ??

Post by StMarks »

Cav wrote:It's difficult to make that stuff look neat....
Fwiw I know exactly what you mean, and for many years I dispelled the thought of using the stuff. "Nice clean precise couplings" were my preference.
However over recent years I have realised just how much more efficient joints can be with just a smear of jointing paste. FYI my opinion was directly influenced by a chap I met who was a CORGI gas fitter, trained by british gas over 40y ago. He's semi-retired now but does occasional heating engineering jobs for trackday tokens. When a conversation we were having strayed onto plumbing connections, and my disdain for plumbers paste, he pointed out that gas connections MUST use paste. He claimed that he had never been pulled up on a weeping joint over his entire careerer.!
User avatar
Cav
Posts: 7947
Joined: 27 Oct 2015, 12:00
Your Bike: 2009 ZX6R
Has thanked: 1035 times
Been thanked: 2199 times

Re: What are you doing today ??

Post by Cav »

I recently had gas training and they said categorically to never use tape or putty for any brass connections and that threaded is better than soldered. I guess it's one of those things of learning from experience.

I went back to the plumbing place and told them the brand of the thermostat and valve. They said if they knew what brand I had, they wouldn't have sold me the coupler they did as that brand makes them too short to use that style. Instead, I have to use a 15mm-8mm solder coupler with an 18mm olive. I've also bought an 8mm straight solder coupler so that we can use brand new pipe for the exposed section. It should make for a neat job.
User avatar
Kwacky
Posts: 38538
Joined: 21 Oct 2013, 21:52
Your Bike: Brutale 800RR, 1000SX Ninja
Location: Brum
Has thanked: 4314 times
Been thanked: 8352 times

Re: What are you doing today ??

Post by Kwacky »

This thread is affirming my decision to never do DIY
Post Reply