Front end knock

Repairs, modifications, bling and tings
Post Reply
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Front end knock

Post by Monty »

After mine and Kwacky's short flight and subsequent hard landing my bike has developed a knock when I brake. Could be the pads moving in the callipers but thinking the headstock bearing might need adjusting.

Anyone know a way of testing the bearings without lifting the front wheel off the ground?
Monty™© MCMLXXII
User avatar
kiwikrasher
Posts: 8862
Joined: 17 Mar 2014, 04:32
Your Bike: ‘16 Thruxton R. '10 Multistrada 1200 S.
Location: Kurrajong Heights, NSW, Australia
Has thanked: 4577 times
Been thanked: 4647 times

Re: Front end knock

Post by kiwikrasher »

Nope. I had the same thing on the Daytona, I was sure it was the headstock bearings. Finally got around to lifting it and they were fine. Turned out to be the brake discs moving on the rivets
Last edited by kiwikrasher on 18 Apr 2016, 12:28, edited 1 time in total.
Happiness is not a destination. It is a way of life.
User avatar
Kwacky
Posts: 38538
Joined: 21 Oct 2013, 21:52
Your Bike: Brutale 800RR, 1000SX Ninja
Location: Brum
Has thanked: 4314 times
Been thanked: 8352 times

Re: Front end knock

Post by Kwacky »

Haven't you got a front paddock stand (or is the Daytona using it?)
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Re: Front end knock

Post by Monty »

kiwikrasher wrote:Nope. I had the same thing on the Daytona, I was sure it was the headstock bearings. Finally got around to lifting it and they were fine. Turned out to be the brake discs moving on the rivets
I had the same on the Daytona. Ive just tried pushing the bike with the front wheel pushed up to the garage wall (no brakes on) and it's still knocking. Going to see if Sarah is strong enough to lever the front wheel off the ground on the side stand!
Monty™© MCMLXXII
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Re: Front end knock

Post by Monty »

Kwacky wrote:Haven't you got a front paddock stand (or is the Daytona using it?)
Yes but the bearing is still loaded on the front stand
Monty™© MCMLXXII
User avatar
kiwikrasher
Posts: 8862
Joined: 17 Mar 2014, 04:32
Your Bike: ‘16 Thruxton R. '10 Multistrada 1200 S.
Location: Kurrajong Heights, NSW, Australia
Has thanked: 4577 times
Been thanked: 4647 times

Re: Front end knock

Post by kiwikrasher »

Monty wrote:
kiwikrasher wrote:Nope. I had the same thing on the Daytona, I was sure it was the headstock bearings. Finally got around to lifting it and they were fine. Turned out to be the brake discs moving on the rivets
I had the same on the Daytona. Ive just tried pushing the bike with the front wheel pushed up to the garage wall (no brakes on) and it's still knocking. Going to see if Sarah is strong enough to lever the front wheel off the ground on the side stand!
Oh.. :|

Stop jumping your bike then!
Happiness is not a destination. It is a way of life.
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Re: Front end knock

Post by Monty »

Monty wrote:Going to see if Sarah is strong enough to lever the front wheel off the ground on the side stand!
She's not, bloody women!
Monty™© MCMLXXII
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Re: Front end knock

Post by Monty »

kiwikrasher wrote:
Monty wrote:
kiwikrasher wrote:Nope. I had the same thing on the Daytona, I was sure it was the headstock bearings. Finally got around to lifting it and they were fine. Turned out to be the brake discs moving on the rivets
I had the same on the Daytona. Ive just tried pushing the bike with the front wheel pushed up to the garage wall (no brakes on) and it's still knocking. Going to see if Sarah is strong enough to lever the front wheel off the ground on the side stand!
Oh.. :|

Stop jumping your bike then!
Good advise! To be fair it would have been OK if I hadn't shat my pants, closed the throttle and landed on the front wheel!
Monty™© MCMLXXII
User avatar
Kwacky
Posts: 38538
Joined: 21 Oct 2013, 21:52
Your Bike: Brutale 800RR, 1000SX Ninja
Location: Brum
Has thanked: 4314 times
Been thanked: 8352 times

Re: Front end knock

Post by Kwacky »

Schoolboy error ;)
User avatar
StMarks
Posts: 4578
Joined: 17 Mar 2014, 21:55
Your Bike: Daytona 675 graphite
Location: East Riding of Yorkshire
Has thanked: 915 times
Been thanked: 1306 times

Re: Front end knock

Post by StMarks »

Do you have an Abba stand.?

Should be fairly easy to see where the movement is, again enlisting Sarah's help will make it easier.: Have someone apply the front brake & rock the bike back & forwards against the brake (enough so that they can feel that knock). You can the visually inspect the headrace to yolk & front disc play etc to identify the source.
Have you checked the front spindle & it's clamps are all fully tightened,?
Another source of this can be the bushes in the front forks themselves.
Good luck mate.
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Re: Front end knock

Post by Monty »

Booked it in at the local garage on Saturday morning, don't have any c-spanners and don't fancy using a drift on it. Plus I can't be arsed!
Monty™© MCMLXXII
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Re: Front end knock

Post by Monty »

StMarks wrote:Do you have an Abba stand.?

Should be fairly easy to see where the movement is, again enlisting Sarah's help will make it easier.: Have someone apply the front brake & rock the bike back & forwards against the brake (enough so that they can feel that knock). You can the visually inspect the headrace to yolk & front disc play etc to identify the source.
Have you checked the front spindle & it's clamps are all fully tightened,?
Another source of this can be the bushes in the front forks themselves.
Good luck mate.
No, no stands other than standard under fork type.

I checked and re-aligned the the front spindle a few weeks ago when I got the bike just to make sure there was no friction in the fork tubes. Undid the clamps and spindle and pumped the forks up and down with the brakes off.

Fairly certain it's the bearings as it still knocks with the wheel clocked up against the wall.
Monty™© MCMLXXII
User avatar
Kwacky
Posts: 38538
Joined: 21 Oct 2013, 21:52
Your Bike: Brutale 800RR, 1000SX Ninja
Location: Brum
Has thanked: 4314 times
Been thanked: 8352 times

Re: Front end knock

Post by Kwacky »

Monty wrote:Booked it in at the local garage on Saturday morning, don't have any c-spanners and don't fancy using a drift on it. Plus I can't be arsed!
"What appears to be the problem with your bike?"

"So there I was, out with a couple of mates, when I got this idea into my head that the bike was just like a BMX, so I hit this blind crest at about 80 mph........"
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Re: Front end knock

Post by Monty »

(rolf) (facepalm)

Nah I'll just tell him I bought it like this!
Monty™© MCMLXXII
User avatar
D41
Posts: 12923
Joined: 22 Sep 2014, 11:36
Your Bike: Triumph Daytona 650.
Has thanked: 4283 times
Been thanked: 1129 times

Re: Front end knock

Post by D41 »

Monty wrote:
Monty wrote:Going to see if Sarah is strong enough to lever the front wheel off the ground on the side stand!
She's not, bloody women!
LMFAO....I once had the ex and the boys holding up the front of my bike while I went inside to the bathroom.

Then I made a drink and sat down to watch TV...took them about 15 minutes to figure it out....came inside all knackered and pouring sweat!!! (lol)
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Re: Front end knock

Post by Monty »

(lol) cruel but funny
Monty™© MCMLXXII
User avatar
kiwikrasher
Posts: 8862
Joined: 17 Mar 2014, 04:32
Your Bike: ‘16 Thruxton R. '10 Multistrada 1200 S.
Location: Kurrajong Heights, NSW, Australia
Has thanked: 4577 times
Been thanked: 4647 times

Re: Front end knock

Post by kiwikrasher »

Monty wrote:(rolf) (facepalm)

Nah I'll just tell him I bought it like this!
Was it a dealer sale? If so, surely you could hit them up?
Happiness is not a destination. It is a way of life.
User avatar
Monty
Posts: 6671
Joined: 12 Mar 2014, 07:59
Your Bike: 2010 ZX6R
Location: Buxton
Has thanked: 2092 times
Been thanked: 2412 times

Re: Front end knock

Post by Monty »

Took it in to DK (Stoke) today and they checked the headstock bearing, nothing wrong with it. Still got the knock so thinking it might just be the shim stacks in the forks. Will get MCT to look at it when I get around to upgrading the suspension.

Really glad I took it in though, the mech took it out for a spin and came back saying that front tyre is horrible why are you riding around on that. School boy error, on closer inspection (read first inspection) the treads have stepped!
Monty™© MCMLXXII
Post Reply